Smart Dimensions

Smart dimensions tool - used in Smart Assemblies, Wood/Metal framing, and Smart Views solutions

Smart Dimensions - Introduction for Smart Assemblies
Smart Dimensions is a tool for creating dimensions for selected elements in a View. What should be dimensioned, to where dimensions should snap, where dimen...
Fri, 17 Sep, 2021 at 12:07 AM
Smart Dimensions - Menu
Configurations - open configurations window. Dimension Elements in View - will dimension all visibile elements based on selected Configuration. Updat...
Fri, 12 Jun, 2020 at 10:51 AM
Smart Dimensions - Configuration Window
Configuration window 1 - Select, Create, Duplicate, Rename, Save your configurations 2 - Select Category of elements that you want to dimension with ...
Fri, 12 Jun, 2020 at 10:51 AM
Smart Dimensions - Configuration Settings
Total measure settings can be found in the Configurations window of Smart Dimensions: There are settings for Horizontal, Vertical, and Diagonal tot...
Tue, 14 Sep, 2021 at 10:55 AM
Smart Dimensions - Configs - Common Settings
Grouping - dimension lines may be grouped by selected parameter Filtering - use Filter by parameter or by Material Only one Type of elements...
Fri, 12 Jun, 2020 at 10:51 AM
Smart Dimensions - Configs - Text Note Settings
Text Note Type - select Text Type which should be used for Notes. Settings which have influence if you use Smart Dimensions in the view apart from ...
Fri, 12 Jun, 2020 at 10:51 AM
Smart Dimensions - Configs - Dimensioning
There are several tabs for dimensioning elements in which you can define how elements on different Faces or directions should be dimensioned. In each ...
Fri, 30 Apr, 2021 at 3:07 PM
Smart Dimensions - Structural Rebar
To dimension structural rebar, select the Host category (wall, column, beam, etc.) to be included in total measure: Then, define Structural Rebar d...
Tue, 14 Sep, 2021 at 10:12 AM
How to measure elements from Linked models
Elements from linked models can now be measured with Smart Dimensions. It’s particularly important when applying Smart Dimensions in plan views, sections, a...
Thu, 16 Sep, 2021 at 11:41 PM
How to measure elements to any point
You can measure to any point of a loadable Family automatically with Smart Dimensions. Just add a vertical or horizontal reference plane that contains &...
Fri, 17 Sep, 2021 at 12:06 AM