Wood/Metal Framing
Custom Join – is a multi-functional dialog where user can define rules for studs/joins including size, count, position, rotation, spacing, alignment etc. Al...
Sun, 10 Jan, 2021 at 5:59 PM
Align Stud Spacing with Frame and Openings Sides Align Stud Spacing with Frame and Openings Sides – option to align stud/joist spacing with opening r...
Wed, 14 Jul, 2021 at 4:36 PM
Allow to Create new Types for Metal Profiles (in Wall+M, Floor+M, Roof+M) Allow to Create new Types for Metal Profiles - creates new types automatic...
Wed, 1 Sep, 2021 at 7:04 PM
Trimming Joist Trimming Joist – in this tab you will find all settings for creating trimming joist needed for the opening. Trimming Joists are sy...
Sun, 10 Jan, 2021 at 5:34 PM
Framing End Extension Framing End Extension – offsets frame from the roof end. Example with wood: Framing End Extension = -50: Example with met...
Sun, 10 Jan, 2021 at 6:00 PM
Top/Bottom Plate Ridge Studs Controls ridge studs near sloped start/end plates and near sloped top/bottom trimmers. Top/Bottom Cripple ta...
Wed, 14 Jul, 2021 at 4:55 PM
Apply B/N/B (Bridging/Nogging/Blocking) Apply B/N/B (Bridging/Nogging/Blocking) – choose whether or not the rules listed below should be applied to th...
Mon, 11 Jan, 2021 at 8:48 PM
Brace Type Use Main Types – brace family and type will be taken from Common Settings tab. Type – select the family and type that will be used for ...
Fri, 8 Jan, 2021 at 7:22 PM
Cut Holes Cut Holes – choose whether the holes will be created according to the rules listed below. Cut Diagonal Cripple Studs (in Wall+, Wall+M) ...
Tue, 12 Jan, 2021 at 8:43 PM
Use Short Noggings Use Short Noggings – makes short noggings between studs, instead of long ones. Example with wood frame: Use Short Noggings is swi...
Fri, 8 Jan, 2021 at 8:06 PM