Wall Reinforcement Workflow
1.  Make sure you have Rebar Shapes in your model. They should be visible in your Project Browser: If you don't have them, load them from Libra...
Mon, 26 Oct, 2020 at 2:21 PM
Wall Link
Links Rebar Configuration with selected wall layer. Choose which configuration should be used on each wall layer. 1. Create Rebar Configuration. 2. Sel...
Mon, 28 Oct, 2019 at 12:14 PM
Create Rebar
The Create Rebar command creates reinforcement for selected walls if Rebar Configs have already been created and assigned to the Wall through the Wall Link....
Mon, 28 Oct, 2019 at 12:14 PM
Rebar cover reference
Rebar cover reference is a parameter in all rebar tabs. It allows users to change the plane in which the position of the rebar is calculated. Below is seen...
Tue, 7 Dec, 2021 at 12:16 PM
Update Rebar
Update Rebar will delete reinforcement created with Wall Reinforcement tool and insert reinforcement by using the configurations used on this particular wal...
Mon, 28 Oct, 2019 at 12:15 PM
Update by Wall Link
This command will delete all reinforcement created with the Wall Reinforcement tool. Then it will read information in Wall Link and use the selected configu...
Mon, 28 Oct, 2019 at 12:15 PM
Modify Rebar
    1. Select Modify Rebar.     2. Select rebar. Configuration window of this reinforcement will open. You can see name of the configuration at the upper-l...
Tue, 9 Nov, 2021 at 8:56 AM
Delete Rebars
Delete Rebar - deletes all reinforcement hosted in the wall. Delete WR Rebar - deletes reinforcement created by Wall reinforcement tool.
Tue, 9 Nov, 2021 at 9:05 AM
Configuration Files Location
Path to configuration files. You may predefine personal or shared/company path for reinforcement configurations. Prepare your configurations, use them for ...
Mon, 28 Oct, 2019 at 12:15 PM
Rebar Configurations - Common Settings
Modify Configuration Settings  Minimal Cover - define cover distance around openings for edge bars, if they intersect openings. Minimal Rebar Leng...
Wed, 26 May, 2021 at 3:31 PM