Location for export of CNC files
Location for export of CNC files – select where to export CNC files. It can be project file location or any other custom location.
Project Information Parameters
Project Information Parameters – define parameters to take values of project name and project number. These parameters comes from Revit → Manage → Project Information:
Result in exported BTL file:
Element Identification and Mark
Element Identification and Mark – select element identification and marking configuration. This goes to advanced settings where you can predefine marking for plates/rims joists, girders, studs, joists and columns. Also you can make special element filtering.
Automatically skip not marked Elements
Automatically skip not marked Elements – automatically skips elements if CNC Part Number parameter is empty.
If this option is switched OFF then the product will show a warning message with information about missing value.
Such element is not exported in BTL file:
Automatically skip filtered out Elements
Automatically skip filtered out Elements – automatically skips filtered out element from configuration.
Marking Orientation by
Marking Orientation by – marks can be oriented by host (Wall, Floor, Roof, Truss) or by structural framing elements.
Assembly Station Mode
Assembly Station Mode – select if export has to be in one file or in separate files for each wall/floor/roof panel.
Split to Separate Files by
Export Wood Details – exports information about the details.