Framing Configuration may be found in two locations:
Window – Window Join Framing
Window – Window Join Framing configuration settings are used to predefine Left, Right, Middle, and Center Top or Bottom Trimmers and Cripples. Settings are saved under separate configuration name and can be adjusted for different join sizes (From – To).
Example: From = 0, To = 180. If the distance between openings is smaller than 180, then the openings will be joined and the trimmers or cripples will be modified with Edit Configuration.
Include Opening Side Offset – controls whether or not the joined opening should have offsets around the opening, which come from single opening settings Offsets.
There are common settings for trimmers where you can predefine the type and automatically define the depth by layer thickness. With Use this Type for all Trimmers you can automatically change the selected type for all left, right, middle, or center trimmers.
Here you can control Left and Right trimmers:
Left and Right positions from external side:
Here you can control Middle and Center trimmers:
Middle trimmers will be added equidistant from left and right trimmers:
Center trimmers will be added equidistant from left and right openings:
Here you can control Bottom Cripple Trimmer:
Example: Count of Bottom Trimmers = 1:
Here you can control Top Cripples: