Change reinforcement settings only for selected Structural Framing element.


  1. Select Modify Rebar.
  2. Select rebar. Configuration window for selected reinforcement will open. You can see the name of the configuration in the upper-left of the Reinforcement Configuration window:
  3. Make desired changes in configuration window – add rebar, switch off selected rebar, change rebar type, step, hooks, or other settings – and finish with Save & Close.

Reinforcement  will be updated for that Structural Framing instance. There will be no impact on configurations saved in Configuration File's Location.


Alternative sequence of steps:

  1. Select Rebar.
  2. Select Modify Rebar. Configuration window for selected reinforcement will open.
  3. Make desired changes in configuration window – add rebar, switch off selected rebar, change rebar type, step, hooks, or other settings – and finish with Save & Close.