1. Select Modify Rebar.

    2. Select rebar. Configuration window of this reinforcement will open. You can see name of the configuration at the upper-left side of Rebar Configuration:

    3. Make changes in configuration window – add other rebar, switch off selected rebar, change rebar type, step, hooks, or other settings – and finish with Save & Close.

Reinforcement of selected configuration instance will be updated for that wall. There will be no impact on configurations saved in Configuration File's Location.


NOTE: you can use Save to overwrite configuration in the configurations folder or Save As to save it with a different name.


or


  1. Select Rebar.
  2. Select Modify Rebars. Configuration window of this reinforcement will open.
  3. Make changes in configuration window – add other rebar, switch off selected rebar, change rebar type, step, hooks, or other settings – and finish with Save & Close.