Sheathing Configuration – allows you to configure and save settings for sheathing layouts. These settings can be saved and linked with roof layer using Link Roof.
Sheathing Dimensions – predefine vertical and horizontal sheathing sizes (Width and Length).
Mark Settings – predefine default values for these parameters for later use in schedules and tags.
Opening – predefine top, bottom, left, and right sheathing offsets from opening.
End Connection – predefine sheathing settings for roof end connections.
Layer Extension – distance from roof face.
Example: For the free end connection, Layer Extension = 20:
Split at Joist – define the joist number at which the sheathing must be split.
Example: Split at Joist = 1:
Build in Place – writes Yes/No information into the sheathing instance parameter if it is build-in-place or is prefabricated with the whole roof frame. This parameter can later be used in schedules or view filters.
Excluded – removes the sheathing (part) from the model. Excluded sheathings are only visible when under the cursor and will not be included in schedules.