Finish your modeling with the built-in shop drawing generator and deliver your wall framing estimation in the same hour. Compile your complete shop drawings with dimensioning, part lists, and material take-off automatically.
Wall+ will collect all elements from one wall panel and make an assembly with predefined views, add dimensions, add tags, make sheets, and put the views into the sheets.
The basic shop drawing workflow consists of the following steps:
1. Wall+ → define Drawing Configuration
2. Wall+ → make shop drawings for one wall using Create Assembly
3. Wall+ → number the framing members
4. Add shop drawing views into the sheet for one wall and save it as a template for future walls
5. Wall+ → make shop drawings for other wall segments
6. Wall+ → update shop drawings if any changes have been made to the model
Drawing Configuration – predefine the settings for creating shop drawings. It is very versatile with thousands of different possibilities.
Configurations can be saved, duplicated, renamed, and deleted. You can check the location of configurations under Current Configuration Location:
The 4 tabs (Assembly Views, Detail View, Schedules and Sheets) are for setting up assembly views, detail views, schedules, and sheets, respectively:
Create Assembly – makes shop drawings for selected walls. Select any frame from the wall, and after clicking Create Assembly, the software will create shop drawings according to the predefined configuration.
Mandatory condition: selected wall needs to have a Mark value assigned:
This value will be used as the assembly name. You can find shop drawings in Project Browser under Assemblies.
An assembly combines all parts into a single entity, which is scheduled and isolated to create shop drawing views with tags and dimensions.
Add Frames or Assemblies to Assembly
Add Frames or Assemblies to Assembly – adds all elements from the wall or assemblies to the existing assembly.
In order to add all elements from the wall, you just need to select any one frame from that wall and click Finish in the top left corner:
Update Frame Assembly
Update Frame Assembly – updates the selected assembly if any changes were made to the framing or to the Drawing Configuration.
Example 1: dimension type was changed in the configuration. Result after updating:
Example 2: additional bridging was added to the wall. Result after updating:
Disassemble Assembly – removes the assembly relationship between elements in the selected assembly and all associated views.
Recommended workflow: Instead of Revit → Disassemble, we recommend using Wall+ → Create Assembly → Disassemble Assembly as it doesn't show unnecessary pop-ups and deletes the gravity point.
Calculate Assembly Dimensions
Calculate Assembly Dimensions – calculates assembly dimensions (area, volume, width, depth, length, height) by predefined rules and writes the results in assembly instance parameters (Assembly Area, Assembly Volume, Assembly Width, Assembly Depth, Assembly Length, Assembly Height) for later use in schedules.
Select area calculation method:
Calculate Framing Element Mass
Calculate Framing Element Mass – calculates mass of selected framing elements, and writes result to Framing Member Mass parameter, which you can find in Element Properties → Identity Data.
Density parameter must be filled in for the element in Materials → Physical tab:
Purge Detail Views if no Assembly
Purge Detail Views if no Assembly – removes detail views if assembly has been disassembled.
Part Assembly Menu
Part Assembly Menu – features for creating assemblies from parts and different part selection options.
Smart Dimensions – features for setting up dimensions in shop drawings.