Sheathing Configuration – allows you to configure and save settings for sheathing layouts. These settings can be saved and linked with wall layer using Link Wall.
Sheathing Dimensions – predefine vertical and horizontal sheathing sizes (Width and Length).
Sheathing Layout – predefine settings for Inner and Outer sheathing layers.
Mark Settings – predefine default values for these parameters for later use in schedules and tags.
Opening – predefine top, bottom, left, and right sheathing offsets from a window, door, or other opening.
L Connection, V Connection, End Connection, T Connection
L Connection, V Connection, End Connection, T Connection – predefine sheathing settings for different wall connections.
Layer Extension – distance from a wall face.
Example: For the free end connection, Layer Extension = 150:
Split at Stud – define the number of studs where the sheathing must be split.
Example: Split at Stud = 1:
Build in Place – writes Yes/No information into the sheathing instance parameter if it is build-in-place or is prefabricated with the whole wall frame. This parameter can later be used in schedules or view filters.
Excluded – removes the sheathing (part) from the model. Excluded sheathings are only visible when under the cursor and will not be included in schedules.